Supported Desk and Room Phones
- 08 Sep 2023
- 1 Minute to read
- Print
- DarkLight
- PDF
Supported Desk and Room Phones
- Updated on 08 Sep 2023
- 1 Minute to read
- Print
- DarkLight
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
Learn more about how to set up a user desk phone or set up a room phone.
Dialpad supports the following Obihai, Polycom, and Yealink IP desk and room phones, purchased directly from Dialpad or not.
Supported Desk Phones
Use the chart below to view Dialpad's supported desk phones and their tested firmware.
Obi for Dialpad 300 ATA — Firmware: 3.2.2.6259
VVX x50 Series Obi-edition (250, 350, 450) — Firmware: 6.4.3.10318
VVX 200, 300, 310, 400, 410, 500, 600 — UCS Firmware: 5.9.7.3480
VVX 201, 301, 310, 311, 401, 411, 501, 601 — UCS Firmware: 6.4.2.3256
* Apart from the VVX x50 and DECT series, Polycom phones have 2 generations. If your device ends in a 1 (as opposed to 0), please use the newer firmware.
Poly D230 DECT — Firmware:7.1.3.9112
SIP-T33G — Firmware:124.86.0.51
SIP-T43U – Firmware:108.86.0.51
SIP-T46U – Firmware:108.86.0.51
SIP-T48U – Firmware:108.86.0.51
SIP-T54W – Firmware: 96.86.0.45
SIP-T57W – Firmware: 96.86.0.127
B 10 -Firmware: 1.0.2
B 20 -Firmware: 1.0.2
B 30 -Firmware: 1.0.2
Supported Room Phones
Use the chart below to easily view Dialpad's supported room phones and their tested firmware.
Polycom Trio 8300 — Firmware: 8.1.2
Polycom Trio 8500 — Firmware: 7.2.1.1679
Polycom Trio 8800 — Firmware: 7.2.1.1679
Polycom Trio C60 — Firmware: 5.9.5.3153
Soundstation IP 6000 — Firmware: 4.0.15
Soundstation IP 7000 — Firmware: 4.0.15
For full feature support, please check our Device Recommendations
Was this article helpful?
